This high performance RS-422/485 multiport serial PCI card suits a broad range of environments, and is a perfect addition for connecting two-wire (with Auto Transceiver Turn Around feature, ATTATM) and four-wire configured serial devices to a host computer. Compliant with PCI 2.2 standard specifications, PCI2S485 offers a high performance 16C950 compliant UART offering maximum data transfer rates of up to 921kbps, and offers broad compatibility with any available 3.3V or 5V PCI or PCI-X slot.

Now you can add a high-speed RS-232 serial COM port to your mobile computer and maximize your connectivity with speeds up to 921 Kbps. Attach modems, bar code scanners, mag stripe readers, GPS receivers, digital cameras or other RS-232 serial devices. These Mobility Friendly cards are the world's lowest power add-on serial adapters, extending the battery life of your PDA.

The Perle UltraPort Universal 3.3/5v PCI card is the most advanced serial card solution on the market today providing a flexible range of solutions for retail point of sale, data acquisition, office automation, advanced kiosk design and much more. Perle UltraPort communicates at bi-directional speeds up to 921.6 Kbps per port with the highest standard of surge protection available to ensure the reliability and security of your data.

StarTech's PCI1S950DV gives you high performance 16C950 serial UART channels/ports for connecting any new or old serial peripheral, with data transfer rates of up to 460 Kbits/sec. Perfect for connecting serial modems, POS devices, PDAs, digital cameras, printers, ISDN terminal adapters and more, to your system. Installation is a breeze with the options of using PCI 5V / PCI-X 3.3V. This card supports for Windows XP, Me, 2000, 98, 95 and NT4. Plus, IRQ sharing and a PCI plug and play interface, guarantee convenient, hassle-free connections.

StarTech.com's PCI1S550 adds 1 additional serial port to a PC, allowing users to connect hardware with serial interfaces such as modems, PDAs, digital cameras, serial printers, digitizer tablets, label printers and ISDN terminal adapters to their PC.

The PCI1S550 is guaranteed to work with any PC (drivers for Windows XP, ME, 2000, 98, 95, 3.1, NT, Linux and DOS are included). It is easy to install and use thanks to its step-by-step instruction manual and its Plug-and-Play connectivity. IRQ sharing feature also eliminates IRQ conflicts.

A high-speed 16550 UART 9-pin serial port transfers data at up to 920 Kbps baud rate, ensuring that connected hardware runs at peak performance. Also, built-in 16 byte FIFO buffers work to increase data speeds when multitasking.

On top of this, all StarTech.com I/O cards feature a lifetime warranty that ensures continued operation as long as you need it.

The HWIC-CABLE-D-2 1-port DOCSIS 2.0-based cable HWIC provides lower total cost of ownership, advanced quality-of-service (QoS) enforcement, and advanced monitoring and load-balancing capabilities for customers by optionally integrating a DOCSIS 2.0-based cable modem within a Cisco Integrated Services Router (ISR) or Cisco IAD2430 Series Integrated Access Device.

The Juniper Networks single-port E1 Mini Physical Interface Modules (Mini-PIM) for the SSG 20 platform complement the five on-board 10/100 Ethernet interfaces with expanded WAN connectivity. The E1 Mini-PIMs include one physical E1 port with an integrated CSU/DSU.

The combination of a E1 modem and an integrated CSU/DSU eliminates the need to deploy several separate external devices, thereby consolidating devices to reduce capital expenditures, saving valuable space and simplifying management.

1-Port Smart Interface Card (SIC) provides a variety of expansion options that let you enhance 3Com Router 5012 and Router 5009 performance to optimize network operation. Customizes your network to your business needs.

The Ethernet Enhanced Physical Interface Module (EPIM) for the Secure Services Gateway (SSG) 500 Series platforms is designed to complement the four on-board 10/100/1000 Ethernet interfaces with expanded Ethernet connectivity options.

The Ethernet Enhanced Physical Interface Module (EPIM) for the Secure Services Gateway (SSG) 500 Series platforms is designed to complement the four on-board 10/100/1000 Ethernet interfaces with expanded Ethernet connectivity options.

This single port PCI Express IDE Adapter Card provides a cost effective way to use legacy drives with modern computers, by turning an unused PCI Express port into an available IDE port! Providing data burst transfer rates of up to 133MBps and support for PIO 0/1/2/3/4 and UDMA 33/66/100/133 operating modes, PEX2IDE offers an efficient way to add an IDE port.