TE100-S5 is an Auto-MDIX switch designed specifically to boost network performance by eliminating network congestions and unnecessary network traffics. Each port on the Switch provides dedicated bandwidth and can negotiate between 10/100Mbps network speeds and half/full duplex modes. Plug and Play provides cost-effective and high performance solutions.

You can now enjoy the benefits of sharing one Internet account,as well as your printers and peripherals, and you can exchange data quicklybetween connected computers. Your new Belkin 5-Port NetworkSwitch (the Switch) will enable communication via e-mail and the Internetfor all your connected computers. The Network Switch can be used toconnect PCs, additional switches, gateway routers, and other networkingcomponents.

The Allied Telesyn AT-FS705L unmanaged switch provides powerful 10/100 switching solutions to desktop and small network environments. Each switch features full auto-negotiating 10/100 ports which automatically detect speed and duplex modes of attached devices, allow-ing the switch to automatically configure for the best possible performance.

The AT-FS705L switch is fully auto-configuring requiring minimal or no set-up by the user. The auto-sensing ports allow seamless and simple connectivity between existing 10Mbps Ethernet and 100Mbps Fast Ethernet UTP devices, and all units can be installed in minutes. This model is equipped with a MDI/MDIX port for simple connection to other hubs and switches. Front panel LEDs allow users to monitor the switch status providing simple "at a glance" management.

The VSE-105A is a high resolution video splitter. Designed to take the video signal from a single computer and broadcast it to several outputs (monitors, projectors, etc.) at a distance of up to 210ft, while maintaining superior quality video with no distortion or ghosting. Splitters can even be cascaded to support greater numbers of outputs. ConnectPRO supports resolutions up to 2048x1536 and recommends using ConnectPRO's own super-shielded premium quality video cables, with ferrite cores. The VSE-105A supports Stereo audio input and output using standard 3.5mm TRS audio jacks.

The VSE-105 is a high resolution video splitter. Designed to take the video signal from a single computer and broadcast it to several outputs (monitors, projectors, etc.) at a distance of up to 210ft, while maintaining superior quality video with no distortion or ghosting. Splitters can even be cascaded to support greater numbers of outputs. ConnectPRO supports resolutions up to 2048x1536 and recommends using ConnectPRO's own super-shielded premium quality video cables, with ferrite cores.

GET USB 2.0 FOR AN UNREAL SPEED BOOST!
USB connections are everywhere chances are if you purchase a device that plugs into a computer, it uses a USB connector. Not all USB peripherals perform the same many of the latest operate at high-speed and push data up to 40 times faster than standard USB. But you'll need a new connection to get maximum performance the USB 1.1 connections on your computer won't do. Add the low cost Sonnet Allegro USB 2.0 PCI adapter card to your computer (install it in any available PCI slot) and bring it up to speed with the latest USB technology, simply fast!

The XPress-Pro 52000 compact, fast Ethernet switches are equipped with 5-port 10/100Base-TX networking. By using standard auto-negotiation and the inclusion of auto-MDIX, Lantronix delivers a cost-effective way of integrating legacy 10 Mbps networks with 100 Mbps fast Ethernet networks.

With award-winning performance in an incredibly compact design, MiLAN's MIL-S500 Switch auto-negotiates 10/100Mbps connections for fast and simple switching in workgroup, small office, and home environments.

The AT-FS705E FC Fast Ethernet switch is unmanaged Layer 2 switch. It can be used in a variety of network configurations and topologies. You can use the switch to create small workgroups with dedicated 10/100 Mbps links to your network devices, such as workstations, servers, printers, and routers. You can also use the switch to interconnect Ethernet hubs to provide a bridge between the different workgroups of your network. Finally, you can connect the switch to other Ethernet switches so that it can be part of a larger Ethernet network.